| Make | American Hoist | | Model | NCK H14 | | Year | 1980 | | Lifting capacity | 12 T | | Jib length | 12,35 m | | Condition | Average condition | | Location | Netherlands | | Comments | 1980 NCK H14 4x2
- Type: H14
- S/N: 14 Y1030
- Lifting capacity: 12 T
- Telescopic 3 sections boom: 12.35m
- 2 sheaves hook block
- Hours: meter not found
- Engine: 6 cyl Ford diesel. Good start and running.
Normal exhaust smoke. No blow by.
- Main hydraulic pumps and components: perfect
Unit is fast and powerfull.
- Slew ring: Good (tight clean ring, no wear at all)
- Transmission: powershift Clark. 2 speeds forward + reverse.
High and low gears.
All good working and operating
- Hydraulic suspension.
Hight level can be raised to stabilize crane when travelling with load.
- Tyres: 14.00 - 20. 30 to 50 % OK
- Chassis is clean, free of weld or crack.
- General cosmetic: Paint need attention
- Leaks: no specific
- Weight: 18000.kg
- Lenght: 11m
- Width: 2.49m
- Hight: 3.15m
Note: Hydraulic cylinder inside boom (used to move the boom section) is
operating but need to be repaired. The cylinder head (where you put the
pin) is broken and need to be welded.
Conclusions:
Good straight general condition.
Could go straight to work, even with no inside boom cylinder repairs,
once boom sections are secured with pins. |
| Seller | TRADEX IMP-EXP | | Contact | GAFSOU Michael | | Telephone | 06 80 22 64 47 (France) | | Fax | +31703642812 | | Address | bloemendaalsezeedijk 10
4765 BP ROTTERDAM - Netherlands | | Occupation | Trader | | Spoken languages | english, French | | | | |
|
Click on photo to enlarge
  Services
Tools |
Back 
